h-enquire
01257

RT1 miniature resin trap

Small capacity resin trap derived from the 20/2 machines well-proven trap

The RT1 is a heavy duty miniature resin trap providing 0.6 litres (20 fluid ounces) of resin catching capacity. Resin is collected in a low cost, easily replaceable paper drinking cup. Vacuum measurement and control are provided by the well proven components from our original Vacmobile 20/2 system. Combined with a customer-supplied vacuum pump, the RT1 can be simply converted into a complete vacuum system for vacuum bagging and small scale resin infusion. As an example of such a system, please refer to our E1 series information sheet.

RT1 pdf iconDepending on the requirements of the application, the RT1 may be combined with vacuum pumps ranging in capacity from about 3 m3/h (1.8 cfm) to 30 m3/h (18 cfm).

An accessory kit for degassing resin on the way in to the internal catchpot is available as an option. Please see the third thumbnail image above.

For more detail on this system, please open the PDF.
larger imageClick the thumbnail to enlarge the image ABOVE
Steel lid for vacuum bagging Glass lid for infusion
E1 - steel lid for vacuum bagging E1-glass lid for infusion

Outer vessel capacity

1.8 litres (3.9 US pints)


Disposable catchpot

  • Paper drinking cup of 600 ml (20 fluid ounce) capacity.
  • Standard supply is 1 cup in the trap and 10 spares. Similar capacity cups should be readily available in most countries.


Standard features

Vacuum regulator, vacuum gauge, coarse air filter, pump isolation valve and absolute pressure gauge connection (O-ring sealed socket to suit 8 mm or 5/16” OD male stem).


Pump hose connection

Hose tail to suit 19 mm (¾”) nominal bore hose as standard. Other sizes on request.


Trap lid options

  • Two trap lid options are available (see "TRAP LID OPTIONS" tap).
  • The pressed steel lid does not allow the trap contents to be viewed while under vacuum and should be reserved for vacuum bagging over dry laminates or very small infusions.
  • For infusion applications, the toughened glass lid option allows the catchpot contents to be inspected at any time.
  • For ease of cleaning, the glass is protected on both sides by disposable transparent PVC shields.


Tubing connections

  • 2 connections in 4 optional sizes to suit the following outside diameter extruded tubes: 3/8” to 10 mm, 1/2” to 13 mm, 5/8” to 16 mm, or 19 mm to 3/4”. With adaptors, also suitable for 1/2” and 3/4” inside diameter tubing.
  • On all standard tubing sizes, high integrity vacuum connections are quickly and reliably achieved at the trap lid via O-ring seals on the outside of the tube.


Vacuum integrity

All RT1 series resin traps are tested to achieve vacuum leak rates of less than 1 mbar per hour (or more than 1,000 hours to leak back to atmosphere).


Dimensions (with base panel)

Length 240 mm (9.5”) | Width 240 mm (9.5”) | Height 320 mm (13.4”)


Weight

4.1 kg (9 lbs)


Optional hose kit

RT1 Hose KitExtremely flexible wire reinforced silicone rubber hose. Standard length 500 mm (19.7”) terminating wih a ¾” BSPP female union. This will allow easy fitting to ¾” male threads (either BSP or NPT). Other terminations on request.


Warranty

Full repair/replacement warranty applicable worldwide.
0
enquire now (2)(copy)

Payment information

We accept payment by direct
bank transfer in US$, Euro, 
GB pounds and NZ$ and also
by the following credit cards:
 
         Payment Options
 

Satisfied clients in more than 60 countries:

  • Airbus Logo Sm
  • mercedes-benz-logo sm
  • bladedynamics4
  • Pratt and Whitney Sm2
  • mit-logo-words1
  • Eads Sm
  • porsche logo sm 2
  • MFG WIND Sm
  • Alloy Yachts
  • ORACLE RACING Sm
  • NZ AIR FORCE Sm
Vacmobiles Badge Footer