Description
Absolute pressure gauges and ultrasonic leak detectors are useful for improving quality and productivity in the vacuum applications for composites
GDH111-Set absolute pressure gauge (precision pressure gauge for low pressures)
Absolute pressure gauges use the absolute zero of pressure as their reference datum and measure pressure independently of altitude and weather conditions. In composites manufacturing applications, absolute pressure gauges can be used to:
- Provide faster and more precise leak test (drop test) results
- Diagnose water and solvent vapour problems causing porosity
- Identify incomplete or inconsistent laminate evacuation causing dry areas
- Check vacuum pump performance.
G1111 specification
Measuring ranges (absolute pressures)
- 0-1,700 mbar. Resolve to 0.1 mbar
- 0-1.7 bar. Resolve to 0.001 bar
- 0-1,292 mm Hg. Resolve to 0.1 mm
- 0-25 psi. Resolve to 0.002 psi
Max pressure
- 3 bar absolute
Accuracy
- +2 mbar at 5-300C (41-860F)
- +1.25% of full scale.
- Calibration can be improved with access to a high vacuum pump capable of less than 0.1 mbar
Connection
- Suits 4 mm (5/32”) ID tube at gauge
- Supplied as standard with 6 mm OD tube terminating with an 8 mm (5/16”) OD male stem compatible with O-ring sealed compressed air sockets
Power supply
- 2x AA Battery (included)
- Auto power off
Case
- Padded carry case included
VPE ultrasonic leak detector
Ultrasonic leak detectors enable small vacuum leaks inaudible to the human ear to be detected and physically located. Using a leak detector will considerably speed up the location and repair of vacuum bag leaks.
VPE leak detector specification
Sensitivity
- -80dB/volt/microbar
Frequency response
- 38 to 42 kHz
Audio output
- 0 to 4 kHz (via headset, with volume control)
Display
- 10 element bar graph
Power supply
- 9 V DC battery (included)
- Auto power off
Case
- Padded carry case included
Reviews
There are no reviews yet.